Since 99,800, the price of BYD Seal 06DM-i and Qin L DM-i has been announced, which can’t be said to be earth-shattering, but it is enough to shock 99% people. A mixed B-class car is sold directly to the price of A-class car, and you should know that Qin PLUS also sold this price a year and a half ago.

So can the seal 06DM-i sold in "998" be brainless? Today we will talk about its configuration and price.

Looking at the power first, Seal 06DM-i is the first to be equipped with the fifth-generation DM technology. Generally speaking, the 1.5L engine has higher thermal efficiency (46.06%), power loss and fuel consumption can be as low as possible.2.9L, the longest battery life2100km. Entry two models equipped with10.08 degree battery, pure battery life is 80km, and the rest of the medium and high batteries are15.87 degreesWith a battery life of 120km and a 65L fuel tank, the battery life can be close to 2000km even without charging.

So as far as power is concerned, the fifth-generation DM technology is at the same price, and both PHEV and HEV are basically the strongest.

In terms of configuration, BYD has made "safety" the same for all departments.There is only one difference in the number of airbags between low and high allocation.The other front and rear airbags are basically the same. At the same price, there are still many brands that are used to "simply matching" the number of airbags in low-profile models, which really should not be.

In fact, an overview of the Seal 06DM-i configuration table shows that the low-equipped and medium-equipped models pay more attention to pragmatism and are equipped with ordinary cruise control. If richer active safety configuration is needed, the cost performance will be higher with a little budget.

In addition, these three models are rich in daily practical functions, and the minimum models areRear radar+rear image, the rest of the models areFront and rear radar +360 panoramic image.Intelligent lathe, external discharge, automatic air conditioning, leather steering wheel, leather seat.These functions are equipped.

The active safety function has been supplemented and upgraded on the sub-top and top models.Full speed adaptive cruise system, this one is down.DiPilot intelligent driving assistance systemIt is more practical to run at high speed.Driving recorder, adaptive high beam and automatic folding of rearview mirrorIt is also a standard item for these two models.

But the top model also has an extraInduction wiper, automatic downward tilting of exterior rearview mirror, 15.6-inch central control large screen, wireless charging of mobile phone, ventilation and heating of front seats, and ambient light..

It is not difficult to find that in order to lower the price threshold of Seal 06DM-i as much as possible, BYD has abandoned some functions of low-and medium-sized models in combination with user needs. From the perspective of practicality and price, there is no problem at all. After all, this is a "Practicality first"The model.

Even if the interior hardware of the lowest model is different from other models, it is completely understandable, and the price difference between each model of Seal 06DM-i is 10,000 yuan, and the upgrade for every 10,000 yuan is quite reasonable.

Class 100,000, ultra-low fuel consumption, long battery life, multi-link suspension and B-class car.At the same price, you can’t find anything better than Seal 06.DM-iA better choice, so not surprisingly, Qin L. DM-iAnd seal 06DM-iWill enter the top 10 of the monthly sales list.

Finally, how to choose the five models of Seal 06DM-i? My suggestion is to choose according to your budget. No matter the entry version of 99,800 or the top model of 139,800, you can’t go wrong to buy either one. If you are still entangled, you can refer to our recommendation index.

Today (April 26th), the traffic police in Liuzhou (Guangxi) received an alarm from a citizen G, saying that a Mazda car he was driving had been hit by a Mercedes-Benz that claimed to be "carrying a corpse". The citizen also posted this story on WeChat WeChat official account, which attracted more netizens’ attention.

G A self-reported original text This article is a picture of Liuzhou police WeChat WeChat official account.

After receiving the alarm, the police immediately used the intelligent transportation system to monitor the relevant sections according to the information provided by G. After verification, the police found that the number plate Gui A * * * F, which collided with G, was a fake car. Immediately after the incident, I got on the expressway out of the city from the Liujiang Expressway toll station.

G said that the first time he had such an accident, he was a little scared, and at the same time, the other party had an advantage in the number of people. When he saw a "corpse" in the back seat, he felt stroke of bad luck, so he compensated the other party for 3,300 yuan according to the other party’s request. After calming down and thinking carefully afterwards, G found that the incident was full of flaws, so he chose to ask the police for help. At present, the case is still under investigation.

In recent years, all provinces and cities can see the news of being touched with porcelain in an endless stream, and the traffic police in Liuzhou also summarized some crime characteristics of the party.

one

Most of the crimes were committed on expressways, and some were committed on sparsely populated roads. Freeways are generally sparsely populated, and most suspects who touch porcelain choose luxury cars with foreign licenses on highway sections with fewer vehicles, and specially choose cars with only one driver on board. Most suspects prefer to choose female drivers. In this way, it is easy to control each other after creating a traffic accident, use both hard and soft means to extort money, and even use violent means to rob. At this time, the driver only has the idea of spending money to eliminate disasters. In addition to highways, criminal suspects also like to choose sparsely populated places such as suburban junctions, and arrange "childcare" in advance. After the collision time, "enthusiastic onlookers" often join the claim, causing psychological pressure on drivers;

2

Most of the vehicles involved in the crime are "luxury cars". In the eyes of people who don’t know the truth, how can people who can afford luxury cars cheat people for a little money? As everyone knows, most luxury cars that touch porcelain are on the verge of scrapping or have been scrapped. Criminals who touch porcelain buy second-hand luxury cars at a high price and touch porcelain on the road through camouflage such as renovation and modification, because according to normal procedures, the maintenance cost of luxury cars is higher, and they can ask the victims for more compensation, which is often much higher than the actual loss. In addition, luxury cars are usually equipped with fake license plates, which makes it difficult for victims to find the parties according to the license plates.

three

The time of committing crimes is regular. According to the statistics of the traffic police department, cases of touching porcelain occurred in recent years, mostly at 13: 00-15: 00, or at midnight. During this time period, drivers driving on the road are prone to fatigue due to the influence of temperature and biological clock, which is easy to give porcelain-touching personnel an opportunity. In the event of a collision, the driver will subconsciously "convict" himself, thinking that it was an accident with the other party because his consciousness was vague, while the video blind zone could not capture the process of "accident" and negotiation, which also made it difficult for the police to identify and investigate the incident.

four

The Road Traffic Law of People’s Republic of China (PRC) stipulates that minor traffic accidents that have no casualties, do not affect normal driving and have clear responsibilities can be resolved through consultation, and shall not affect normal traffic. People who touch porcelain often take advantage of this. After artificially causing traffic accidents, they ask the drivers who are touched by porcelain to pay cash on the spot for compensation on the grounds that "it is too much trouble to wait for the traffic police to deal with it, and it is not a big problem anyway". Some people even use violence to threaten the drivers who are touched by porcelain. Under the coercion of the other party, the victims can only submit.

So what should the owner do when he encounters the behavior of suspected touching porcelain on the road?

01

Act according to legal procedures and take the initiative to report to the police for the record. Most people who touch porcelain choose single people, or those who lack driving skills and safety awareness. They take advantage of their unfamiliarity with road conditions and don’t know how to deal with them. After the accident, they take the form of multi-person siege to ask for money. Therefore, after an accident, first stop the car, observe the characteristics of the other vehicle and the situation on the car, and call the police in time, report the situation to the police and wait for treatment. Generally, people who touch porcelain will leave a record at the police. When they find that the person who has been touched by porcelain calls the police, they will stop claiming compensation. If, after getting off the bus, you find an unusually large number of enthusiastic onlookers, and they are all trying to persuade you to settle the matter, you must not agree, because these people are generally child care workers, even if they are really enthusiastic people, they should wait for the ruling of the traffic police after the accident. When waiting for the arrival of the traffic police department, you can use the equipment available for taking pictures and videos to record the evidence.

02

Travel in strict accordance with traffic laws and regulations. Cases of touching porcelain are generally chosen in sparsely populated areas where illegal driving occurs. Therefore, when we travel by car, we must drive in strict accordance with the traffic laws and regulations, and do not have illegal acts such as blindly overtaking, crossing the line, and not obeying traffic laws when changing lanes, so as to give the porcelain gang an opportunity. If the accident really happens, don’t destroy the scene easily, and use mobile phones to fix the evidence on the scene to prevent criminals from deliberately confusing and maliciously claiming.

03

Actively use the power of science and technology. Adding a driving recorder to the car is helpful to improve driving safety.

Reminder: After an accident, for ordinary minor property damage accidents, the scene of the accident can be cleared for further disposal after the evidence on the scene is fixed. In case of a suspected porcelain accident, especially one party often asks to handle the accident in the form of "settling", and will take the initiative to point out the other party’s mistakes, accuse the other party of taking full responsibility for the accident, and at the same time take various measures to prevent the victim from reporting to the police and applying for insurance. In this case, we must be more careful and call the police immediately when we ensure our own safety.　

(The original title is "A man said that he was touched by a Mercedes-Benz" corpse car "? When you meet a porcelain policeman, teach you to do this ")

Today at 12:08, Huawei Mate70 series officially opened reservations. Within 5 minutes after opening, more than 270,000 people have made reservations. (Small K Note: The product quotation has not been disclosed yet, and there is no need to pay a deposit for an appointment, which is a free appointment.)

Continue to swipe to see the next light touch to read the original text

Finance Association swipe up to see the next one

Original title: "HUAWEI Mate70 series open booking within 5 minutes over 270,000 people reservation"

Read the original text

With better economy and stronger performance, it has attracted the attention of many users. Among the 150,000-200,000-class pure electric SUVs, Y PLUS is more prominent, which has aroused the interest of many consumers. So how to choose Kia EV5? We can only draw a conclusion after comparison.

Appearance: each has its own characteristics

In terms of appearance, KIA EV5 has a high face value. The car has been praised by many users with its iconic digital roaring front face and Star-Map star-mark light set. The side lines are smooth and dynamic, and the geometric front edge and low wind resistance wheels are very eye-catching. The tail design is recognizable and the appearance is pleasing to the eye.

The appearance of Ai ‘an Y PLUS is not as fashionable as that of Kia EV5. The car adopts a fairly well-regulated design. Generally speaking, it has nothing to shine on, but it is more stable and generous.

Endurance: KIA EV5 is outstanding.

The long battery life is the obvious advantage of KIA EV5. This car is the only one in its class that has broken through the 700km battery life. Even the standard version of KIA EV5 has a cruising range of 530km, and the long battery life version of KIA EV5 leads the same class with a super-long battery life of 720km. The car is equipped with an 88.1kWh battery, and it takes only 27 minutes to charge the battery from 30% to 80%, and all performance indicators are at the leading level in the same class.

There are two kinds of cruising distances for the 2024 Ai ‘an Y PLUS, which are 510 km and 610 km respectively, both of which are lower than KIA EV5. Among them, the 2024 Ai ‘an Y PLUS Smart Driving Edition is equipped with a 69.98kWh battery, and the battery energy is weaker than that of Kia EV5.

Configuration and space: Kia EV5 is dominant.

Kia EV5 provides L2+ intelligent driving assistance function, equipped with new intelligent internet entertainment system and Connect intelligent internet system, and supports panoramic display, intelligent anti-collision, 11.3-inch HUD, UWB digital key and other functions. Equipped with 5-level adjustable intelligent kinetic energy recovery system, it supports i-PEDAL single pedal mode. It has an environmentally-friendly intelligent cockpit, providing a 67L front standby box and a 513L trunk, which can be expanded to 1718L, and provides configurations and functions such as a central drawer-type heating and cooling incubator, a 5.4L central drawer, a trunk multi-scene expansion table, and two V2L power supplies inside and outside the car.

Ai ‘an Y PLUS supports L2 intelligent assisted driving, with a trunk volume of 405L, support, lane keeping assistance, remote key and other functions. The space and configuration are not as attractive as Kia EV5.

The above is a comparison between KIA EV5 and Ai ‘an Y PLUS. It can be seen that KIA EV5 has more advantages and higher cost performance in general.

Welcome to pay attention to [car home Hangzhou Preferential Promotion Channel] to bring you the latest auto market trends. Recently, a high-profile luxury car, the imported BMW i5, is in full swing in Hangzhou with attractive preferential activities. It is understood that the current maximum discount amount has reached an astonishing 140,900 yuan, and the minimum starting price has dropped to 499,000 yuan. For consumers who are interested in starting this high-performance electric vehicle, this is an opportunity not to be missed. Want to know more details and get higher preferential treatment? Please be sure to click the "Check Car Price" button in the quotation form, and let’s seize this rare opportunity to buy a car together.

With its exquisite design, BMW i5 (imported) shows the classic BMW family style. The front face adopts the iconic kidney-shaped air intake grille with streamlined body lines, which gives the vehicle a sense of movement and strength. Overall style, it combines elegance and technology elements, showing the gas field that luxury cars should have, and details reveal the persistence of environmental protection concept. It is an attractive electric vehicle.

The side lines of BMW i5 (imported) are smooth and dynamic, and its body size is 5060mm x 1900mm x 1505mm, showing the style of a luxury car. The wheelbase reaches 2995mm, ensuring ample internal space and driving stability. The car is equipped with unique 245/40 R20 front tires and 275/35 R20 rear tires, which not only provides excellent grip, but also complements the rim design, adding a touch of sportiness to the overall appearance.

The interior style of BMW i5 (imported) is luxurious and attention to detail, and its spacious interior space creates a comfortable atmosphere for passengers. The steering wheel is made of leather with excellent texture, and the design is ergonomic. It supports electric up and down+front and rear adjustment, providing excellent control experience. The 14.9-inch central control screen is a highlight of the interior, which integrates multimedia system, navigation, telephone and air conditioning control, and is equipped with voice recognition function, which is convenient to operate and full of technology.

In terms of seats, the seats are made of various materials, including imitation leather, genuine leather and leather/suede mix and match, to ensure the comfort of passengers. Both the driver’s seat and the driver’s seat are equipped with electric adjustment functions, including front and rear, backrest, height, leg rest and lumbar support, which support four-way adjustment, and the driver’s seat also has electric memory function, which is convenient for different drivers to set individually. The front seats also provide additional heating and ventilation functions to ensure the best ride experience in all weather conditions. The rear seat supports the proportion of tilting down, which is flexible in space and convenient for carrying goods or riding many people.

BMW i5 (imported) is equipped with a powerful engine with a maximum power of 442kW, providing surging power output. At the same time, its torque performance is also excellent, up to 795 Nm, which ensures that the vehicle can show superior performance in various driving scenarios.

As the price reduction promotion of BMW i5 (imported) draws to a close, we sincerely invite you to seize this rare opportunity to buy a car. With the further preferential price, this future-leading luxury car not only has excellent driving experience and technology configuration, but also will bring you a real cost-effective improvement. Don’t miss this opportunity to get in touch with future travel, let’s move towards a new life of intelligent and green driving together. Finally, thank you for your continuous support and trust in BMW, and look forward to your unforgettable journey with BMW i5. Act quickly and make your dreams within reach!

Every reporter Chen Pengli every editor Wei Guanhong He Xiaotao　　　　

On the afternoon of June 30th, Gree Electric (SZ000651, share price 36.51 yuan, market value 205.6 billion yuan) held its 2022 annual general meeting of shareholders in Gree Electric, Zhuhai.

National business daily reporter learned that this year’s Gree Electric shareholders’ meeting was very popular, with as many as 186 shareholders attending offline. The whole meeting lasted about 2 hours, and Dong Mingzhu, Chairman and President of Gree Electric, answered many investors’ questions one by one.

The reporter learned that the concerns of the shareholders at the scene mainly focused on the development and dividend plan of the subsidiary Gree Titanium New Energy Co., Ltd. (hereinafter referred to as Gree Titanium).

Dong Mingzhu responded that there was no problem with the technology of Gree Titanium, and the acquisition of Gree Titanium was to lengthen the industrial chain of Gree Electric and at the same time open the sales of automobile air conditioners. Gree Titanium is still in the process of "filling the pit", but the dawn is in front of us. Regarding the dividend issue, Dong Mingzhu said that he did not think that Gree’s dividend was low. From 2022 to 2024, Gree will pay dividends as promised, and it is expected that Gree Electric’s cash dividend will reach the standard of "2 yuan per share" next year. She also said that Gree is an international brand in China, and the goal of air conditioning is to be the first in the world in order to sell the China brand to the whole world.

On-site photo of the shareholders’ meeting Source: Photo by reporter Chen Pengli

Talking about Gree Titanium: In the efforts to "fill the pit"

At this year’s shareholders’ meeting in Gree Electric, the most frequently asked question by shareholders is about the development of Gree Titanium. In fact, investors have been questioning Gree Electric’s acquisition of Gree Titanium.

According to the financial data of Gree Electric in 2022, by the end of 2022, Gree Titanium had total assets of 25.024 billion yuan, total liabilities of 24.786 billion yuan and total net assets of about 238 million yuan.Last year, Gree Titanium’s revenue was 2.587 billion yuan and its net profit was-1.905 billion yuan.What investors are really worried about is whether Gree Electric will support Gree Titanium when it needs equity financing.

Image source: screenshot of financial data

At the shareholders’ meeting, Dong Mingzhu described in detail why he wanted to buy Gree Titanium and the current situation of Gree Titanium. She said that the technology of this enterprise itself is absolutely no problem."If the former boss didn’t set me up with a pit, it would be a very good enterprise."She said that Gree Electric’s optical storage uses Gree titanium battery, and the safety of the battery is particularly important for Gree’s optical storage. If it hadn’t been acquired at that time, Gree’s light storage would not be realized now.

Moreover, at that time, she thought that the cars of Gree Titanium (namely Yinlong New Energy) could add a channel to Gree, such as automobile air conditioners, automobile compressors, automobile motors and automobile capacitors. "We have dealt with the automobile industry, and it is even more difficult to sell automobile air conditioners … This platform, I think, is very important." "At the beginning, the acquisition of Gree Titanium was unsuccessful. It was not the opposition of small and medium shareholders, and the struggle behind it was too complicated."

She told the shareholders present, "I had to gamble on this game when I borrowed money, just to make Gree Electric’s industrial chain longer."

"At present, the triangular debt problem of Gree Titanium has been gradually resolved. I believe that Gree Titanium has brought many industrial linkages to Gree Electric and brought butterfly effect. We can still make it a very independent subsidiary with the fastest speed and be able to support ourselves. " Dong Mingzhu said.

She also expressed the hope that everyone would give Gree Titanium some time."There is a process of filling in the pit, which I think is very promising. Dawn is just ahead. " "It’s not a day’s work. I believe we can see a little hope next year."

No matter how to expand investment,

Dividend plan will not change.

In 2022, Gree Electric’s annual profit distribution plan is to distribute cash dividend 10 yuan (including tax) to all shareholders for every 10 shares, with a total cash dividend of 5.614 billion yuan (including tax). After the release of the plan, it immediately triggered a heated discussion among investors, who generally believed that the dividend was less than expected.

At the end of April this year, Gree Electric also issued "Shareholder Return Plan for the Next Three Years (2022 -2024) (Revised Draft)". On the premise that the company’s cash flow meets the company’s normal operation and long-term development, the company’s annual cash dividend per share from 2022 to 2024 is not less than 2 yuan or the total cash dividend is not less than 50% of the audited net profit attributable to shareholders of listed companies in that year.

On the afternoon of June 30th, several shareholders also mentioned the issue of dividends to Dong Mingzhu. Dong Mingzhu explained the modification of the dividend plan. "We are worried about what if the income is not good and we can’t make 2 yuan? We will divide 50% of the profit of the year according to the minimum standard, not less than this number. "

Dong Mingzhu also said that from 2012 to 2022, Gree Electric’s accumulated cash dividends exceeded 100 billion yuan in 11 years. She hopes that investors and Gree Electric will help each other in the same boat and share happiness. "Gree Electric does not rely on the stock market to develop. Gree adheres to the principle of benefiting shareholders, but it also needs to retain space for sustainable development."

For the dividend outlook in 2023, she said,According to her own assessment, she can achieve "2 yuan for cash dividend per share" next year, and even add "above".

"Three years of dividend commitment, no matter how we expand our investment, we can do it (the cash dividend per share is not low in 2 yuan), which will not change." Dong Mingzhu said.

The chairman is not above himself,

There is no rule against live broadcast.

Regarding the shareholders’ question that the growth of Gree Electric’s operating income has not been obvious in the past few years, Dong Mingzhu said that shareholders should allow enterprises to have an adjustment period, instead of stipulating that enterprises should grow by 20% or 50% every year."Say a word of anger, you can do it."

She told the shareholders present that the reason for Gree’s slow growth in the past few years was that it was affected by the epidemic. On the other hand, in the Internet age, "I can certainly cooperate with platforms such as JD.COM in an instant and go online, but we have tens of thousands of dealer stores, and hundreds of thousands of people need to eat. We should adjust this relationship in place and not give up social responsibility for temporary interests."

Talking about Gree’s diversified business, Dong Mingzhu said that in the era of high-quality development, Gree should be an industry that the country lacks and the enterprise development strategy needs, such as CNC machine tools. Now Gree’s CNC machine tools have been exported. Although the scale is not large, it is a blueprint that Gree Electric will paint for everyone in the future. "Gree’s industrial sector, robots, motors, etc., each product has huge market space, so I am very confident that enterprises will be able to go healthier and go further."

Regarding the promotion of overseas markets, Dong Mingzhu said that Gree is an international China brand. If air conditioners are to go global, it is absolutely necessary to develop not only the Middle East market, but also all markets. In overseas markets, Gree does not want to catch up with its peers. "In the future, we will be the first in the world."

Dong Mingzhu also said that some people outside are very concerned about Gree’s successor."Don’t worry. If you think you can be a successor, you can go. If not, don’t judge the internal development of the company. We have our own set of rules. "

Dong Mingzhu revealed that after the shareholders’ meeting, her next work arrangement is live broadcast with goods. "People say that I am the chairman of the board of directors, how do you know that I didn’t do it? There is no rule that the chairman can’t do live broadcast.The head of an enterprise should regard the enterprise as his own life, rather than being above it … I think Gree Electric’s strategic planning has never been lost."

Reporter |Chen pengli?edit|Wei Guanhong He Xiaotao Du Bo

Proofread |Sun Zhicheng

| national business daily ?nbdnews??Original article |

Reprinting, editing, copying and mirroring are prohibited without permission.

I’ll bring this one to you today. Come and see it quickly.

First of all, from the appearance, the front face of Extreme Yue 07 presents an angular design style and looks sporty. Coupled with the cold headlights, it adds a bit of exquisiteness. The car is equipped with LED daytime running lights, automatic opening and closing, adaptive far and near light and so on. Coming to the side of the car, the body size of the car is 4953 mm * 1989 mm * 1475 mm. The car adopts fashionable and dynamic lines, and the side circumference looks very beautiful. With large-sized thick-walled tires, the shape is eye-catching. In the rear part, the rear looks very simple and generous, the taillights are very angular, and the overall layout is impressive.

In terms of interior, the interior of Extreme Yue 07 presents a simple design style, which is very fashionable and sporty as a whole. The steering wheel design of the car is very simple, and it is made of imitation leather, which gives people a bright feeling. From the central control point of view, with the 35.6-inch central control screen, the interior style is impressive, which is in line with the temperament of the car. The dashboard and seats are equally eye-catching. The dashboard of this car presents an avant-garde design style and looks very domineering. The car adopts genuine leather/imitation leather mixed seats, equipped with functions such as electric adjustment of auxiliary seat, electric adjustment of seat with memory, and seat proportion tilting, which has good support and comfort.

Extreme Yue 07 matches the gearbox, the acceleration time of 100 kilometers is 3.5s, and the power meets the daily use completely OK.

The space performance of the 07 trunk is ok. If there are big items during the trip, the rear seats can be put down, which is not a problem for daily use. At the same time, the car is equipped with fatigue warning, anti-lock braking (ABS), LED daytime running lights, brake assist (EBA/BAS, etc.), brake force distribution (EBD) main driver airbag, co-pilot airbag, side airbag curtain, front side airbag and other safety configurations.

After reading the above introduction, let’s make a summary. This car has been introduced almost before, and I believe many users who buy a car have taken a fancy to its comfort and practicality.

　　Cute panda cubs. Photo by Zhong Xin

　　Zhongxin. com, Chengdu, September 22 (Reporter He Shaoqing, Anyuan) The reporter learned from chengdu research base of giant panda (referred to as "Giant Panda Base" for short) on the 22nd that in order to ensure the welfare and safety of giant pandas and ensure the visitors’ visiting experience, during the National Day of 2019, Chengdu Giant Panda Base will implement early warning measures to limit the flow of tourists, control the total number of tourists and dynamically control the flow of tourists inside and outside the park.

　　According to the announcement of chengdu research base of giant panda 2019 National Day tourist restriction, from October 1 to October 7, Chengdu Giant Panda Base will stop ordering physical tickets (including ticket window and self-service ticket machine), and all online tickets will be purchased in advance, with a limit of 60,000 online tickets per day.

　　The naive giant panda. Photo by Zhong Xin

　　The real-time maximum number of tourists in the park is limited to 22,000. When the number of tourists in the park reaches the upper limit of 22 thousand, visitors will be suspended from checking in; Restart ticket checking after the number of tourists in the park drops. Visitors can choose their own travel dates and time slots. If the number of tickets booked for a single day reaches 60,000, reservations will no longer be accepted. Online ticket buyers are limited to purchase tickets once per mobile phone number, and 5 tickets at a time.

　　During the National Day, Chengdu Giant Panda Base will jointly broadcast the life of the giant panda cubs born this year. "Chenglang" is affectionately called "Thumbelina" by Chinese and foreign giant panda fans. By then, tourists at home and abroad and giant panda fans who have not bought tickets in time will be able to share the giant panda culture without leaving home through the Internet.

Su Zhengfa [2009] No.3 January 7, 2009

People’s governments of cities and counties, provincial committees, offices, departments and bureaus, and units directly under the province:

　　In order to fully implement the spirit of the 17th National Congress of the Communist Party of China, thoroughly implement Scientific Outlook on Development, vigorously implement the strategy of rejuvenating the province through science and education and strengthening the province through talents, further mobilize the enthusiasm and creativity of scientific and technological personnel, and effectively improve the ability of independent innovation, the provincial government decided to award 180 projects in Jiangsu Province in 2008, including 13 first prizes, 49 second prizes and 118 third prizes.

　　I hope that the award-winning units and individuals will make persistent efforts to climb the peak and strive to create new achievements. The province’s scientific and technological workers should learn from the winners, continue to carry forward the spirit of unity and cooperation, tenacious struggle, seeking truth from facts and being brave in innovation, conscientiously implement the outline of national and provincial scientific and technological development plans, vigorously promote scientific and technological progress and innovation, accelerate the transformation of scientific and technological achievements into real productive forces, and make greater contributions to accelerating the construction of innovative provinces and promoting sound and rapid economic and social development.

Attachment: List of winners of Jiangsu Science and Technology Progress Award in 2008

　　First prize (13 items)

　　1. Study on the late Permian mass extinction.

　　Completed by: Nanjing Institute of Geology and Paleontology, Chinese Academy of Sciences

　　Mainly completed by: Jin Yugan Shen Shuzhong, Wang Xiangdong Wang Yue, Cao Changqun, Wang Wei, Wang Jun, Zhu Huaicheng.

　　 Zhang Hua

　　2. Broadband mobile communication RF, antenna and diversity technology.

　　Completed by: Southeast University

　　Mainly completed by: Hong Wei, Zhou Jianyi, Wang Haiming, Kuaizhenqi, Zhao Jianing, Yang Guangqi, Zhang Nianzu and Yu Chen.

　　 Zhang Hui

　　3. Experimental and clinical study of severe acute pancreatitis

　　Completed by: Nanjing General Hospital of Nanjing Military Region

　　Main Accomplishers: Li Weiqin, Yu Wenkui, Tong Zhihui, Wang Zhiming, Wang Xinying, Ye Xianghong, Yan Xiaowen and Zhao Yunzhao.

　　 Quanzhufu

　　4. Xudao 3, a japonica rice variety with high quality and high yield and resistance to stripe disease.

　　Completed by: Xuzhou Institute of Agricultural Sciences, Xuhuai District, Jiangsu Province

　　Mainly completed by: Liu Chao, Wang Jiankang, Chen Ping, Ding Chengwei, Wu Yuling, Guo Rongliang, Xu Jia ‘an, Wang Fuqin and Zhang Tao.

　　5. Key technologies and applications of power MOS integrated circuit design and fabrication process.

　　Completed by: Southeast University

　　 Wuxi China Resources Shanghua Semiconductor Co., Ltd.

　　Main Accomplishers: Sun Weifeng, Su Wei, Shi Longxing, Lu Shengli, Yi Yangbo, Li Haisong, Xu Shen, Fang Shilin.

　　 Xia Xiaojuan Deng Xiaoshe

　　6. Key technologies and applications of efficient, flexible and energy-saving automobile assembly material conveying equipment

　　Completed by: Jiangsu Tianqi Logistics System Engineering Co., Ltd.

　　 Nanjing University of Aeronautics and Astronautics (NUAA)

　　Mainly completed by: Yang Leilou, Pei Huang, Bai Kaijun, Tang Dunbing, Zhang Yuanxing, Ye Wenhua, Liu Liming and Guo Dahong.

　　 Li fengbao

　　7. Study on classification, systematic evolution and genetic diversity of Gramineae plants.

　　Completed by: Institute of Botany, Chinese Academy of Sciences, Jiangsu Province

　　Mainly completed by: Chen Shouliang, Liu Jianxiu, Jin Yuexing, Sheng Guoying, Zhuang Tide, Liu Xintian, Li Ya and Wu Zhujun.

　　 Xuan Jiping

　　8. Optimized operation technology and industrial application of large-scale ethylene plant

　　Completed by: China Petrochemical Yangzi Petrochemical Co., Ltd.

　　 East China University Of Science and Technology

　　Main Accomplishers: Jiang Yong Qian Feng Wei Da Gong Baoren Wang Zhenlei Xu Yanfeng Han Jinhua Du Wenli

　　 Cha xingqi

　　9. Innovation and practice of hydrodynamic theory and flood control safety technology of plain rivers

　　Completed by Hohai University

　　 nanjing hydraulic research institute

　　 Jiangsu province water conservancy survey design & research institute co., ltd

　　 Nanjing Water Conservancy Planning and Design Institute Co., Ltd.

　　 Yangzhou survey design & research institute co., ltd

　　Mainly completed by: Tang Hongwu, Xiao Yang, Wang Lingling, Fu Zongfu, Zhu Lijun, Yan Jing, Gu Zhenghua and Han Longxi.

　　 Lu shengqi

　　10. A series of clinical treatments for severe and complicated spinal deformity.

　　Completed by: Gulou Hospital affiliated to Nanjing University School of Medicine

　　Main Accomplishers: Qiu Yong, Wang Binyu, Yang Zhu Zezhang, Zhu Feng, Qian Bangping, Ma Weiwei Sun Xu.

　　 Zhu Lihua

　　11. Design theory and key construction technology of freezing sinking under complex stratum conditions.

　　Completed by: China University of Mining and Technology.

　　 China Coal International Engineering Group Nanjing Design & Research Institute

　　 Zhongmei 5 th construction company

　　 Datun Coal and Electricity (Group) Co., Ltd.

　　Mainly completed by: Yang Weihao, Huang Jiahui, Shen Weian, Xu Daxiong, Song Lei, Li Haipeng, Du Yong and Lin Hong Bao.

　　 Zhang Chao

　　12. Design theory and manufacture of micro-nano medical devices

　　Completed by: Southeast University

　　Main Accomplishers: Yi Hong, Chen Yunfei, Ni Zhonghua, Yang Juekuan, Qiu Xiaoli, Wang Yujuan, Xing Yan and Gu Xingzhong.

　　 Bikedong

　　13. Study on a new way to prevent and treat pulmonary hypertension by targeting SUR 2/KIR 6.X.

　　Setting: First Affiliated Hospital of Nanjing Medical University.

　　 Beijing Saide Weikang Medicine Research Institute

　　 Nanjing medical university

　　Main Accomplishers: Wang Hong Xie Weiping Zhang Shijiang Wang Hai Hu Gang Ding Hongbin Long Chaoliang Cui Wenyu

　　 Jinyu

　　

　

　　Second prize (49 items)

　　1. A new wheat variety Young Mai 13 with high quality, weak gluten and disease resistance.

　　Completed by: Jiangsu Lixiahe Agricultural Science Research Institute.

　　Main Accomplishers: Zhang Boqiao, Gao Derong, Cheng Shun and Lu Chengbin, Wu Hongya, Leng Sufeng and Zhu Dongmei.

　　2. Cultivation and popularization of national new variety Yangzhou Goose

　　Completed by: Yangzhou University

　　 Yangzhou agricultural bureau

　　 Yangzhou runyangshui teqin institute co., ltd

　　 Yangzhou huahong Yangzhou goose breeding goose farm co., ltd

　　 Jiangsu Vocational College of Animal Husbandry and Veterinary Medicine

　　 Poultry Institute, Chinese Academy of Agricultural Sciences

　　 Yangzhou Tian ge e ye development co., ltd

　　Main Accomplisher: Zhao Wanli Ding Tao Wang Zhiyue Wen Guangbao Gong Daoqing Duan Baofa Zhang Jun

　　3. Regularity and physiological regulation of growth and meat quality traits in Taihu pigs.

　　Completed by: Nanjing Agricultural University

　　Mainly completed by: Zhao Ruqian, Yang Xiaojing, Xia Dong, Chen Jie, Chen Jie, Zhou Jie and Wei Xihui.

　　4. Research and application of directional cultivation technology system of poplar plantation.

　　Completed by: Nanjing Forestry University

　　 Jiangsu lvling chemical industry group co., ltd

　　 Jiangsu province forestry technology popularizing station

　　Mainly completed by: Fang Shengzuo, Chen Jinlin, Lu Kecheng, Yang Peng, Tang Luozhong, Xu Hongqiang and Zhang Huanchao.

　　5. Development and control technology of live swine asthma vaccine (168 strains)

　　Completed by: Jiangsu Academy of Agricultural Sciences

　　 Nanjing tianbang biology science and technology co., ltd

　　Main Accomplishers: Shao Guoqing, He Kongwang, Liu Maojun, Zhou Yongqi, Hou Jibo, Liu Yaoxing and Zhao Yongqian.

　　6. Key technologies for manufacturing advanced composite high-pressure gas cylinders

　　Completed by Sinoma Technology (Suzhou) Co., Ltd.

　　 Beijing Bogangyuan Composite Material Co., Ltd.

　　Main Accomplisher: Li Xinhua Wu Mengxian Huang Zaiman Lu Bo Chang Zhiyong Wu Feng Yao Yu

　　7. Super capacitor energy storage system for wind power generation and pitch control

　　Completed by: Jiangsu Shuangdeng Group Co., Ltd.

　　 Institute of Electrical Engineering, Chinese Academy of Sciences

　　Main Accomplishers: Qi Zhiping, Wei Tongzhen, She Peiliang, Yang Baofeng, Wang Sibo, Zhou Long, Su Yingdong.

　　8. Research and development of new energy-saving air conditioning system based on solution independent dehumidification

　　Completed by: Southeast University

　　 Jiangsu province architecture design research co., ltd

　　Main Accomplishers: Zhang Xiaosong Yin Yonggao Liang Caihua Li Shuhong Cai Liang Du Kai Xia Zhuoping.

　　9. Complete sets of technologies for collection, purification and comprehensive utilization of landfill gas

　　Completed by: Nanjing University

　　 Nanjing yunsheng new energy development co., ltd

　　 Nanjing Shunfeng-Painier Air and Gas Purification Equipment Co., Ltd.

　　Main Accomplishers: Chen Zezhi Gong Huijuan Li Jianping Wu Weili Liu Peng Xu Xuesong Liu Keqing

　　10. Development and application of large-scale high-efficiency and energy-saving air pollution control technology

　　Completed by Jiangsu Suyuan Environmental Protection Engineering Co., Ltd.

　　 Jiangsu Xutang Power Generation Co., Ltd.

　　 Jiangsu Changshu Power Generation Co., Ltd.

　　 Yixing xielian thermoelectric co., ltd

　　 China Resources Nanjing Chemical Industry Park Thermoelectricity Co., Ltd.

　　Mainly completed by: Sun Keqin, Zhou Changcheng, Shen Kai, Zhang Yanjing, Li Chenle, Zong Weigang and Zhao Jin.

　　11. Four-stage theory of cyanobacteria bloom formation and bloom prediction

　　Completed by: Nanjing Institute of Geography and Lakes, Chinese Academy of Sciences

　　Main Performers: Kong Fanxiang, Ma Ronghua, Chen Yuwei, Junfeng Gao, Gao Guang, Wu Xiaodong and Zhang Min.

　　12. iPACS-5000 Substation Integrated Automation System and Device

　　Completed by: Jiangsu Jinzhi Technology Co., Ltd.

　　Mainly completed by: Zhu Huaming, Wu Jie, Gu Jian, Chen Xiaoyu, Wang Jian, Xu Hongyuan and Wang Wei.

　　13. A new generation of large-scale business operation support system for telecom operators supporting 3G.

　　Completed by: Nanjing Lianchuang Technology Co., Ltd.

　　Mainly completed by: Liang Bin, Liu Guoxiang, Zhang Yougen, Sun Libin, Li Hua, jackie and Luo Yibin.

　　14. Portable satellite communication system

　　Completed by: Nanjing University of Posts and Telecommunications

　　Mainly completed by: Xie Jidong, Zhao Laiding, Hu Zhengfei, Wang Nianshu, Zhou Yuechen and Wang Shihuan.

　　15. Development and application of collaboration software for distributed heterogeneous data matching.

　　Completed by: Nanjing University of Finance and Economics

　　 Nanjing University

　　 Southeast China University

　　 Jiangsu suyuan information technology co., ltd

　　 Shanghai kingdee software technology co., ltd

　　 Guodian nanrui technology co., ltd

　　Mainly completed by: Cao Jie, Pan Jingui, Ni Zhonghua, Fang Quanma, Yuan Kui, Hu Yuanding and Hu Yangbo.

　　16. Chang ‘e-1 satellite gamma ray spectrometer

　　Completed by: Purple Mountain Observatory, China Academy of Sciences.

　　Main Performers: Chang Jin Zhang Nan Ma Tao Tang Hesen Cai Mingsheng Gong Yizhong Zhang Renjian

　　17. Development and industrialization of GaAs RF integrated circuits for mobile communication

　　Completed by: No.55 Research Institute of China Electronics Technology Group Corporation

　　Mainly completed by: Li Fuxiao, Jiang Youquan, Yang Naibin, Chen Xinyu, Chen Chen, Shao Kai and Qian Feng.

　　18. Research on key technologies of radionuclide tracing and its innovative application in the field of medicine.

　　Completed by: Jiangsu Institute of Atomic Medicine

　　 China Pharmaceutical University

　　Mainly completed by: Yang Min, Wang Guangji, Xu Yuping, Jiang Mengjun, Pan Donghui and Wang Songpei.

　　19. The establishment of the standard material library and fingerprint quality evaluation system of fifteen authentic Chinese medicine resources in Jiangsu.

　　Completed by: Jiangsu Institute of Traditional Chinese Medicine

　　Mainly completed by: Qian Shihui, Qian Dawei, Duan Jin, Li Youbin, Zhu Lingying, Zhang Jian, Peng Yunru.

　　20. High frequency and high voltage electron accelerator

　　Completed by Wuxi Aibang Radiation Technology Co., Ltd.

　　Mainly completed by: Li Zhaoxian, Xia Jinzhi, Liu Yushu, Chen Shuze, Yao Jianping, Feng Boshou and Zhu Xingang.

　　21. SY215C crawler hydraulic excavator

　　Completed by Sany Heavy Machinery Co., Ltd.

　　Mainly completed by: Dai Qinghua, Yi Disheng, Chen Kelei, Zhu Chuanbao, Zhao Zhigang, Cui Huixi and Xue Zhaoyun.

　　22. Laser honing technology and equipment for high-performance energy-saving and environment-friendly engines.

　　Completed by: Jiangsu University

　　 Chang Chai Co., Ltd.

　　 Faw liberation automobile co., ltd. Wuxi diesel engine factory

　　 Yangzhou diesel engine co., ltd

　　Mainly completed by: Zhang Yongkang Fu Yonghong, Xu Yi, Yin Bifeng, Hua Xijun, Yuan Run and Ye Yunxia.

　　23. Composite core soft aluminum stranded wire

　　Completed by: Far East Composite Technology Co., Ltd.

　　Main Accomplishers: Gong Xinming, Jiang Huajun, Wang Chuanbin, Hu Qingping, Xu Jing, Zheng Wending, Gan Xingzhong

　　24. New digital information low-voltage distribution equipment

　　Completed by Changshu Switch Manufacturing Co., Ltd.

　　Mainly completed by: Tang Chunchao, Wang Chunhua Guan Ruiliang, Pan Zhenke, Steve Yu, Wang Jionghua and Yin Jianqiang.

　　25. Robust performance analysis and control synthesis of complex dynamic system and its application

　　Completed by: Nanjing Normal University

　　 Southeast China University

　　 Chinese Marine University

　　Mainly completed by: Yue Dong Fei Shumin Peng Chen Tang Gongyou Yang Jiquan.

　　26. Research on modeling, control and fault diagnosis technology of complex systems.

　　Completed by: Nanjing University of Aeronautics and Astronautics

　　Main Accomplishers: Jiang Bin, Lu Ningyun, Qi Ruiyun, Mao Zehui and Yang Hao.

　　27. Research and development of hindered amine desulfurization and decarbonization series solvents

　　Completed by: Nanhua Group Research Institute

　　Main Accomplishers: Mao Songbai, Zhu Daoping, Ye Ning, Chu Zheng, Ding Yaping, Wang Xiangyun and Huang Xiaoyan.

　　28. Three-dimensional spaced conjoined fabrics and their composites.

　　Completed by Changzhou Bolong 3D Composite Material Co., Ltd.

　　 Beihang University

　　Main Accomplishers: Wu Boming, Zhang Zuoguang, Li Min, Luo Jianhui, Sun Zhijie, Gao Yu and Liu Jiaqing.

　　29. Complete technology for preparation and application of epoxy asphalt composite materials for long-span steel bridge deck pavement

　　Completed by: Southeast University

　　 Jurong city Ningwu Chemical Co., Ltd.

　　Mainly completed by: Huang Wei, Chen Zhiming, Kang Yang, Ying Jun, Zhu Jianshe, Shao Li, Min Zhaohui.

　　30. Design, large-scale preparation and application of low-dimensional titanate in resin-based wear-resistant composites.

　　Completed by: Nanjing University of Technology

　　Mainly completed by: Lu Xiaohua, Feng Xin, Wang Changsong, Liu Chang, Wang Huaiyuan and Shi Yijun.

　　31. High-performance fluorene-based blue light materials

　　Completed by: Nanjing University of Posts and Telecommunications

　　Main Accomplisher: Huang Wei Fan Qu Li Jie Linghai Lai Wenyong Chen Runfeng Jiang Hongji Tang Chao

　　32. Industrial chromatographic separation and purification technology and engineering research

　　Completed by: Jiangnan University

　　 Wuxi green separation application technology research institute co., ltd

　　Main Accomplishers: Peng Qijun, Xu Ling, Yu Zheng, Wu Jinglan and Li Lixia.

　　33. Key technology development and industrialization of converter special steel bar production line in Huaigang

　　Completed by: Jiangsu Shagang Group Huaigang Special Steel Co., Ltd.

　　 Iron and steel research institute

　　Mainly completed by: He Daping, Wang Zhongying, Zhao Pei, Li Peisong, Lu Ping, Wang Qianfang, Qi Chao.

　　34. Ultra-pure high-performance nickel-base superalloy

　　Completed by: Danyang Precision Alloy Factory Co., Ltd.

　　Main Performers: Wan Baifang, Liu Kui, Gao Ming, Zhang Shunnan, Zhang Jianguo, Ma Yingche and Chen Bo.

　　35. Study on preparation of functional nanomaterials by ultrasonic and microwave chemistry methods.

　　Completed by: Nanjing University

　　Main Accomplishers: Zhu Junjie Jiang Liping Zhang Jianrong Jinzhong Xu Wang Hui Xu Shu Liao Xuehong

　　36. Research and application of durability improvement technology for major engineering concrete

　　Completed by: Jiangsu Academy of Building Science Co., Ltd.

　　 Jiangsu bote new material co., ltd

　　 Wuxi communications bureau

　　Main Accomplishers: Miao Changwen, Liu Jiaping, Ding Bei, Ran Qianping, Liu Jianzhong, Mao Liang, Xi Sha Jianfang

　　37. Study on the function of resistin in obesity and insulin resistance and screening of polypeptide drugs.

　　Completed by: Nanjing Medical University

　　 Nanjing Maternal and Child Health Hospital affiliated to Nanjing Medical University

　　 The first affiliated hospital of Nanjing medical university

　　Mainly completed by: Guo Xirong, Chen Ronghua, Qian Lingmei, Liu Feng, Gu Nan, Ni Yuhui and Yang Tao.

　　38. Research on new principles and methods of immunoassay and immune detection system for tumor markers.

　　Completed by: Nanjing University

　　 Jiangsu cancer hospital

　　Main Accomplishers: Ju Xian Yan Feng Tang Jinhai Wu Jie Fu Zhifeng Dai Zong Lin Jiehua

　　39. Basic research on intestinal dysfunction after traumatic brain injury and its influence on brain function.

　　Completed by: Nanjing General Hospital of Nanjing Military Region

　　Mainly completed by: Hang Chunhua, Shi Jixin, Chen Gang, Wu Wei, Li Jieshou Yin Hongxia.

　　40. Cytogenetic and molecular genetic characteristics of malignant hematological diseases and their clinical significance

　　Setting: First Affiliated Hospital of Nanjing Medical University.

　　Mainly completed by: Li Jianyong Xu Wei Chen Lijuan Qian Sixuan Tian Tianmiao Kourong Qiu Hongxia.

　　41. Study on the formation mechanism of tubulointerstitial fibrosis

　　Completed by: Zhongda Hospital affiliated to Southeast University.

　　Mainly completed by: Liu Bicheng, Zhang Xiaoliang, Lu Linli, Xia Huiling, Zhang Jiandong, Lu Zuhong and Zhang Lu.

　　42. Basic research on the mechanism and protective measures of liver injury in small transplantation

　　Setting: First Affiliated Hospital of Nanjing Medical University.

　　Main Accomplishers: Wang Xuehao Yu Yue Li Guoqiang Chengfeng Amanda Yao Li Xiangcheng Tang Liming

　　43. Study on the function and regulation of new human apolipoprotein M and its clinical significance.

　　Completed by: Changzhou First People’s Hospital

　　Mainly completed by: Zhang Xiaoying, Xu Ning, Luo Guanghua, Zheng Lu, Di Dongmei, Zhu Jiang, Mou Qinfeng.

　　44. DWX single hydraulic prop series products

　　Completed by: China University of Mining and Technology.

　　Mainly completed by: Li Bingwen Zhao Jiyun, Wang Qiguang, Li Hongtao Chen Shiqi, Wang Jianwu and Zhao Liang.

　　45. Huaibei mining area coal and gas outburst mine regional gas control technology system and engineering application

　　Completed by: China University of Mining and Technology.

　　 Huaibei Mining Industry (Group) Co., Ltd.

　　Main Accomplishers: Cheng Yuanping Li Wei Zhang Bin Xu Rui Wang Haifeng Mu Junwei Zhou Hongxing

　　46. Development of low-temperature hot rod technology and its engineering application in cold regions

　　Completed by: Jiangsu Zhongsheng High-tech Industry Co., Ltd.

　　 China Railway Northwest Science Research Institute Co., Ltd.

　　 Qinghai province local railway choujian office

　　 Qinghai electric power company

　　Main Accomplisher: Guo Hongxin Liu Feng Dong Xianfu Xiong Zhiwen Huapu School Li Laisuo Ma Ming

　　47. Research on key technologies of Sutong Bridge’s 268m long-span continuous rigid frame bridge project.

　　Completed by: Jiangsu Sutong Bridge Construction Headquarters

　　 China Railway Bridge Bureau Company Limited

　　 Southeast China University

　　 Tongji University

　　Mainly completed by: Ding Feng, Liu Zhao, Jiang Yong, Guan Yijun, Li Guoping, Meng Shaoping, Zhou Xinya.

　　48. Fully automatic hydraulic lifting integral scaffold

　　Completed by: Nantong Sijian Group Co., Ltd.

　　Main Accomplishers: Geng Yuhua, Wang Huaqi, Chen Jian, Chen Baoshu, Ji Yun, Youtong, Jian Hua, Zhou Jian.

　　49. Constant tension spring compensation device for electrified railway catenary

　　Completed by Yangzhou Oriental Hanger Co., Ltd.

　　Mainly completed by: Wu Liqun, post Rong Jun, post Wu Shun

　

　　　

　　Third prize (118 items)

　　1. Research on processing technology and production application of silkworm natural colored cocoon silk.

　　Completed by Xinyuan Cocoon and Silk Group Co., Ltd.

　　 Suzhou University

　　Mainly completed by Chu Chengping, Xu Shiqing, Chen Zhongli, Sun Daoquan and Wang Jiannan.

　　2. Breeding and application of middle japonica rice variety Yandao 8 with resistance to stripe disease.

　　Completed by: Jiangsu Institute of Agricultural Sciences in Coastal Areas

　　Main Accomplisher: Sun Mingfa, Yao Lisheng, Tang Hongsheng, Yan Guohong and Qiu Guicai.

　　3. Research and popularization of the breeding and breeding technology of Procambarus clarkii.

　　Completed by: Jiangsu Freshwater Fisheries Research Institute

　　 Nanjing University

　　 Xuyi county aquatic products technology popularizing station

　　 Huaian Chuzhou district aquatic products technology popularizing station

　　 Danyang runnong fishery technology service co., ltd

　　Mainly completed by: Tang Jianqing, Xia Aijun, Yan Weihui, Xue Hui and Han Fei.

　　4. Study on the mechanism of antagonistic yeast in controlling fruit diseases.

　　Completed by: Jiangsu University

　　Main Accomplisher: Zhang Hongyin Dong Ying Jiang Song Zhang Haihui Xu Bin

　　5. Integration and demonstration of high-quality and efficient production technology of melon vegetables in facilities.

　　Completed by: Nanjing Agricultural University

　　 Nanjing Jiangning District Hengxi Modern Horticultural Science and Technology Demonstration Park

　　 Nanjing Jiangning district agricultural bureau

　　 Nanjing seed Zhan

　　Mainly completed by: Guo Shirong, Shi Zeping, Zhu Guorong, Li Juan and Han Zhiping.

　　6. Establishment, application and popularization of control technology system for exotic invasive weed Solidago canadensis.

　　Completed by: Nanjing Agricultural University

　　 Jiangsu province plants protection station

　　Main Accomplisher: Qiang Sheng Diao Chunyou Song Xiaoling Gong Weirong Dai Weimin

　　7. Research and application of key technologies for industrialization of new starter cultures and fermented products.

　　Completed by: Nanjing Normal University

　　 Nanjing Wei Gang Dairy Co., Ltd.

　　 Jiangsu heng shun Cu ye co., ltd

　　Mainly completed by: Pan Daodong, Yuan Sheng, Dai Chuanchao, Lu Jian and Xia Rong.

　　8. Introduction of new varieties of timely fresh fruits and integrated demonstration and promotion of supporting technologies.

　　Completed by: Nanjing Agricultural University

　　 Jiangsu province gardening technology popularizing station

　　 Xuzhou fruit tree service station

　　 Lianyungang forestry technology guidance office

　　 Wuxi Huishan district Lin Sang technology popularizing station

　　Mainly completed by: Tao Jianmin, Lu Aihua, Liu Xueping, Zhu Guard, Xue Cuihua.

　　9. Breeding and application of starch sweet potato variety Suyu 303

　　Completed by: Jiangsu Academy of Agricultural Sciences

　　 Southwest University

　　Mainly completed by: Xie Yizhi, Zhang Qitang, Fu Yufan, Guo Xiaoding and Xianhong.

　　10. Creation and application technology of osthole, a new biological pesticide for controlling vegetable diseases and insect pests.

　　Completed by: Jiangsu Academy of Agricultural Sciences

　　 Wuhan tianhui biology engineering co., ltd

　　 Jiangsu province suke agrochemical co., ltd

　　 Fuzhou chaoda modern agriculture co., ltd. Nanjing branch

　　 Jiangsu province pesticide inspection office

　　Main Accomplisher: Shi Zhiqi, Lin Kaichun and Fan Yongjian to East Wang Chunmei.

　　11. Innovation and utilization of rapeseed anti-bacterial nucleosis germplasm

　　Completed by: Jiangsu Academy of Agricultural Sciences

　　Mainly completed by: Zhang Jiefu Qi Cunkou Fu Shouzhong Pu Huiming Chen Xinjun

　　12. Molecular detection and ecological sustainable control technology of poplar longicorn disaster law

　　Completed by: Jiangsu Academy of Forestry Science

　　 Jiangsu entry-exit inspection and quarantine bureau

　　 Jiangsu forestry bureau

　　 Nanjing Forestry University

　　 Huaian forest pest and disease prevention quarantine station

　　Mainly completed by: Xu Fuyuan, An Yulin, Xia Chunsheng, Tang Jingen and Liu Yunpeng.

　　13. Development and industrialization of IDP-A type high-efficiency intelligent energy saver

　　Completed by Suzhou Hanfeng Technology Development Co., Ltd.

　　Mainly completed by: Chen Weizu, Ye Chaogao, Liu Min.

　　14 large cement rotary kiln calcination energy-saving technology and equipment

　　Completed by: Jiangsu Pengfei Group Co., Ltd.

　　 Southeast China University

　　 Yancheng institute of technology

　　Mainly completed by: Jia’an Wang, Ben Daochun, Zhang Xiaosong, Ni Wenlong and Zhang Hui.

　　15. Power-type Ni-MH battery with fast charge and high cycle life

　　Completed by Jiangsu Haisida Group Co., Ltd.

　　Mainly completed by: Tang Chenming, Shen Tao, Li Xiaozhong, Xu Zhongyuan and Shi Weibing.

　　16. Preparation and industrialization of biodiesel by microstructure reaction technology

　　Completed by: Jiangsu Jiemei Bioenergy Co., Ltd.

　　Main Accomplisher: Yang Jinliang, Shi Rongbing, Zhang Lixiong, Xu Nanping Yunzhi.

　　17. Nano transparent thermal insulation coating

　　Completed by: Nanjing University of Technology

　　 jiangsu chenguang paint co.,ltd

　　Main Accomplisher: Zhao Shilin, Xu Zhongzi, Miao Guoyuan, Wei Yabing and Zhang Yongjin.

　　18. Research and development of high-performance honeycomb ceramic carrier for automobile exhaust purification

　　Completed by: Jiangsu Gaochun Ceramics Co., Ltd.

　　 shanghai institute of ceramics,chinese academy of sciences

　　Main Accomplisher: Kong Deshuang Gu Changjun Kong Lingren Kong Qiuming Kong Shuanghua

　　19. High-efficiency fluidized filter method flue gas desulfurization device

　　Completed by: Yancheng Dongda Thermal Energy Machinery Manufacturing Co., Ltd.

　　 Southeast China University

　　 Yancheng institute of technology

　　Mainly completed by: Zhu Fudong, Zhaoping Zhong, Liu Yan, Jia Shushan and Xie Renxiang.

　　20. R&D and industrialization of high-efficiency environmental protection and energy-saving technologies and equipment for large power stations

　　Completed by: Jiangsu Zhongneng Power Equipment Co., Ltd.

　　Mainly completed by: Ding Weiping, Chen Taiwen, Gao Zhixiang, Chen Kexiang and Gu Bin.

　　21. Advanced technology for preparing high-purity chlorine dioxide.

　　Completed by: Nanjing University of Technology

　　Main Accomplisher: Xu Yanhua, Zhu Mingxin, Lv Weiya, Wei Wuji and Deng Feng.

　　22. Development, research and application of high-efficiency and energy-saving water turbine applied to water-driven fan cooling tower

　　Completed by Hohai University

　　 Nanjing xingfei cooling equipment co., ltd

　　Main Accomplisher: Zheng Yuan Gu Xingkang Qu Bo Zhou Daqing Tang Weimin

　　23. ITSSKY expressway traffic real-time monitoring system V1.0

　　Completed by: Jiangsu Changtian Zhiyuan Communications Technology Co., Ltd.

　　Main Accomplisher: Sun Dayue, Pu Rong, Yang Ying, Lu Yi and Yu Zhiping.

　　24. Research on laser chaos and its application

　　Completed by: Nanjing Xiaozhuang College

　　 Southeast China University

　　 Nanjing University of Science and Technology

　　Main Accomplisher: Yan Senlin, Zhang Mingde, Chi Zeying, Sun Xiaoxin, aki chan.

　　25. PLC-075 series power line data transmission device and its application.

　　Completed by: State Grid Nanjing Institute of Automation

　　 Nanjing nanrui group company

　　 Guodian nanrui technology co., ltd

　　Mainly completed by: Wang Xiaoyan, Tang Yuming, Li Guochun, Yi Haoyong and Cai Shilong.

　　26. DRT-85A single crystal growth furnace

　　Completed by: Changzhou Huasheng Tianlong Machinery Co., Ltd.

　　Mainly completed by: Feng Jinsheng, Xun Jianhua, Li Liuju, Feng Gong and Wei Shoulong.

　　27. Guoguang Financial Self-help Unified Platform Software

　　Completed by: Changzhou Guoguang Software System Engineering Co., Ltd.

　　Mainly completed by: Jin Tao, Xu Wenbo, Zhong Xia, Zang Weiguo and Chen Jingwei.

　　28. Development and application of modern integrated manufacturing execution system for 5M wide and thick plates.

　　Completed by: Jiangsu Shagang Group Co., Ltd.

　　 Shanghai Baoxin Software Co., Ltd.

　　Mainly completed by Gong Shengqian, Wang Ping, Huang Yinglei, Wang Fang, Wang Liang and

　　29. Research and development of information integration system for discrete manufacturing enterprises and its application in switch electrical industry.

　　Completed by: Daquan Group Co., Ltd.

　　 Beijing qingruan Yingtai information technology co., ltd

　　 Jiangsu university

　　Main Accomplishers: Cai Bin Yong Jianping Zhao Xibin Xu Hui Wu Jie

　　30. Basic research on ring theory and coding in communication system.

　　Completed by: Southeast University

　　Mainly completed by: Chen Jianlong Wang Shuanhong.

　　31. RM-A ultra-clean and high-purity series chemical reagents

　　Completed by Jiangyin Runma Electronic Material Co., Ltd.

　　Mainly completed by: Ge Shiyong, Yao Wei, Zhu Chunxing, Liu Yiping Gao Jian.

　　32. Wafer-level chip scale package technology for image sensors.

　　Completed by Jingfang Semiconductor Technology (Suzhou) Co., Ltd.

　　Mainly completed by: William Wang Yu Guoqing Asher Huang Fulong Li Jianguo.

　　33. CAM—01Z fly ash carbon content monitoring system which is not affected by the change of coal type.

　　Completed by Zhenjiang Starr Electric Co., Ltd.

　　Mainly completed by Zheng Zhongxin, Shi Darong, Yang Wanfu, Yin Hao and Jiang Guodong.

　　34. KJ 101-45B methane sensor

　　Completed by Zhenjiang Zhongmei Electronics Co., Ltd.

　　Main Accomplisher: Jia Baiqing, Guo Fengbin, Hu Fengping and Zhou Jianzhong.

　　35. Digital storage oscilloscope

　　Completed by: Jiangsu Lvyang Electronic Instrument Group Co., Ltd.

　　Main Accomplisher: Yin Derong, Han Gucheng, Lu Huaping, Huang Zhixian, and Lu Quanhan.

　　36. Monitoring technology of internal parameters of 3D braided composites based on optical fiber sensor.

　　Completed by: Nanjing University of Aeronautics and Astronautics

　　Mainly completed by: Yuan Shenfang, Wang Qiang, Huang Rui, Liu Xiaohui and Qiu Lei.

　　37. Model and parameter extraction of micro-nano CMOS on-chip passive devices (inductive components)

　　Completed by: Southeast University

　　 Ai si tai ke (Shanghai) high frequency communication technology co., ltd

　　Mainly completed by: Huang Fengyi, Lu Jingxue, Jiang Nan

　　38. 6-inch silicon epitaxial wafer for new power electronic device chips

　　Completed by Nanjing Guosheng Electronics Co., Ltd.

　　Main Accomplisher: Tan Weidong, Jin Long, Ma Lixing, Ma Linbao and Zhang Wenqing.

　　39. Research and development of new drugs for stroke.

　　Completed by Jiangsu simcere Co., Ltd.

　　 Nanjing xiansheng dongyuan pharmacy co., ltd

　　 Jiangsu xiansheng medicine research co., ltd

　　Main Performers: Yin Xiaojin Ren Jinsheng Xu Xiangyang Ding Lei Li Xiaomin

　　40. Efficient cultivation of Taxus chinensis and R&D and industrialization of taxol extraction from whole plant

　　Completed by: Jiangsu Taxus Biotechnology Co., Ltd.

　　Mainly completed by: Wu Yan, Li Digui, Liu Qingfei, Wu Haigen and Gu Linyuan.

　　41. Synthesis of 7-amino-3-deacetyloxy cephalosporanic acid

　　Completed by: Xuzhou Ruisai Technology Industry Co., Ltd.

　　Main Accomplisher: Hu Xiao, Zhang Xiukun, Wang Ideality, Wang Youzhi and Li Zhiyu

　　42. Research on innovative and environment-friendly N- alkylation reaction technology and development of zoledronic acid injection.

　　Completed by: Yangtze River Pharmaceutical Group Co., Ltd.

　　 Jiangsu university

　　Main Accomplisher: Sun Tianjiang, Lu Hongguo, Xu Ximing, Meng Ting and Liu Jianghua.

　　43. Research and industrialization of key technologies of precision CNC lathe and turn-milling compound machining machine tool.

　　Completed by: Nanjing CNC Machine Tool Co., Ltd.

　　Mainly completed by: Tang Benjin Zhou Yongliang Zhang Zhiying Zhao Yishun Song Ziwei.

　　44. Research and application of DG68 climbing platform fire truck and its core technology

　　Completed by Xuzhou Heavy Machinery Co., Ltd.

　　Mainly completed by: Zhang Yuchun, Shi Xianxin, Tian Zhijian, Zhao Bin and Chen Weidong.

　　45. Complete sets of equipment for industrialized production of edible fungi

　　Completed by: Lianyungang Guo Xin Medical Equipment Co., Ltd.

　　Mainly completed by: Xu Shouhai, Han Shaochuan, Niu Gangfeng, Sun Yanxia and Wang Xichang.

　　46. CM500 comber

　　Completed by: Dongfeima Zuoli Textile Machinery Co., Ltd.

　　 Jiangsu province dong Fei ma Zuo Li textile mechanism engineering technology research center co., ltd

　　Mainly completed by: Zhu Peng, Zhang Jing, Teng Ming, Gao Xiang and Shen Hui.

　　47. Development of Express MAC 623 heavy-duty high-speed four-sided planer and milling machine.

　　Completed by: Jiangsu Jiangjia Machinery Co., Ltd.

　　 Yancheng institute of technology

　　Mainly completed by: Zhu Zhilin, Wang Jundong, Wang Xuhua, Wang Hao and Zou Xiaoxiang.

　　48. WG2000 high-speed air-jet loom

　　Completed by: Suzhou University

　　 Jiangsu wangong technology group co., ltd

　　Mainly completed by: Rui Yannian, Zhou Ping, Feng Zhihua, Qian Zhiliang and Dai Pinwei.

　　49 structural dynamic optimization design technology research and new product development

　　Completed by: Southeast University

　　 Nanjing automobile group co., ltd

　　 Xugong Group Engineering Machinery Co., Ltd.

　　 Jiangsu Duoling CNC Machine Tool Co., Ltd.

　　 Nanjing CNC machine tool co., ltd

　　Mainly completed by: Sun Qinghong, Zhang Jianrun, Zhu Zhuangrui, Sun Beibei and Wu Ming.

　　50. Automatic configurable remote monitoring, diagnosis and maintenance system for manufacturing equipment.

　　Completed by: Nanjing University of Science and Technology

　　Mainly completed by: Lu Baochun, Zhang Wei, Zhang Dengfeng, Wang Maosen and Sheng Guoliang.

　　51. Research on key technologies for the development of on-site hot recycling maintenance engineering vehicle for asphalt pavement.

　　Completed by: Southeast University

　　 Zhenjiang huachen huatong pavement machinery co., ltd

　　Mainly completed by: Shi Jinfei, Zhu Songqing, Zhang Zhisheng, Hu Zhengfei and Wang Hongxiang.

　　52. Research and application of soft-switching inverter energy-saving welding machine

　　Completed by: Jiangsu University of Science and Technology

　　 Zhenjiang Tianhua electromechanical products co., ltd

　　 Kaierda welding machine co., ltd

　　Mainly completed by: Fang Chenfu Yu Zhengde, Wang Jiayou, Tong Zhaobin and Wang Shikai.

　　53. Research, development and industrialization of micro jet sprinkler irrigation unit

　　Completed by: Jiangsu University

　　 Jintan Tian e pen Guan machinery co., ltd

　　Main Accomplisher: Liu Jianrui, Yu Yufang, Shi Weidong, Ma Liutu, Kong Fanyu.

　　54. Study on the application of superplastic forming of large-size and high-performance aluminum alloy structural parts for metro vehicles.

　　Completed by: Nanjing University of Aeronautics and Astronautics

　　 Jinchuang group co., ltd

　　Mainly completed by: Lu Shihong, Wang Youren, Xu Guohui, Liu Renmin and Zhang Zhai.

　　55. Application research and implementation of ship digital manufacturing technology

　　Completed by: Jiangsu University of Science and Technology

　　 Jiangsu modern shipbuilding technology co., ltd

　　Main Accomplisher: Jiang Zhiyong Ma Xiaoping Zhu Jun Zhou Weipeng Wang Jucheng

　　56. NS3000 digital substation automation system

　　Completed by: Guodian Nanrui Technology Co., Ltd.

　　Mainly completed by: Xu Shiming, Huang Guofang, Liu Ji, Ding Jie, Zhou Yefei.

　　57. NC2000 computer monitoring system software platform

　　Completed by: State Grid Nanjing Institute of Automation

　　 Nanjing nanrui automatic control co., ltd

　　Mainly completed by: Zhou Qingzhong, Li Bin, Wu Zhengyi, Zhang Hongfang and Xu Lin.

　　58. R&D and industrialization of high-power national III diesel engine

　　Completed by: Wuxi Diesel Engine Factory of faw liberation Automobile Co., Ltd.

　　Mainly completed by: Qian Hengrong, Huang Chenghai, Chen Boning, Chen Qinxue and Ding Hao.

　　59. Research on key technologies of high-speed switched reluctance motor.

　　Completed by: Nanjing University of Aeronautics and Astronautics

　　 Nantong university

　　Mainly completed by: Liu Chuang, Wang Deming, Zhu Xuezhong, Chen Haijin and Jiang Dongqing.

　　60. Cold-rolled seamless U-tubes for high-pressure feed water heaters

　　Completed by Jiangsu Yinhuan Precision Steel Pipe Co., Ltd.

　　Main Accomplishers: Zhuang Jianxin, Wen Jianliang, Shao Xinzhong, Wang Shunlianghua and Yang Kang.

　　61. Research and practice of information system engineering construction of water control project

　　Completed by Hohai University

　　 Nanjing University

　　 Nanjing cerui technology co., ltd

　　Mainly completed by: Wang Huimin Zhu Yuelong Xu Jiepan Xu Lizhong Li Chenming.

　　62. pyridine base

　　Completed by: Red Sun Group Co., Ltd.

　　Mainly completed by: Xue Yirui, Zhongnan, Xu Qiang, Liu Shan and Tao Jun.

　　63. Low temperature curing cathodic electrophoretic coating

　　Completed by: Jiangsu Hongye Coating Technology Industry Co., Ltd.

　　Main Performers: Yu Xinli Fang Jixiang Chen Weidong Zhou Weibo Qian Daqing

　　64. Industrialization development of bionic pesticides cartap and insecticidal ring

　　Completed by: Jiangsu Tianrong Group Co., Ltd.

　　 Jiangsu Zhongyi chemistry co., ltd

　　 Jiangsu ruihe chemistry co., ltd

　　Mainly completed by: Xu Wangbao, Wei Mingyang, Wang Liang, Zhou Guoping, Yu Guoxin

　　65. Military multilayer composite waterproofing membrane (dual-use)

　　Completed by Kunshan Junwei Industrial Co., Ltd.

　　Mainly completed by: Xia Xiangdong, Chen Guiru and Tang Ming.

　　66. Integrated development of industrial production technology of high-quality melt direct spinning superfine denier polyester filament.

　　Completed by: Jiangsu Hengli Chemical Fiber Co., Ltd.

　　 Donghua University

　　Mainly completed by: Chen Jianhua, Wang Huaping, Ding Jianzhong, Wang Chaosheng and Liu Zhili.

　　67. Industrialization technology of super absorbent fiber

　　Completed by Nantong Jiangchao Fiber Products Co., Ltd.

　　 China textile science research institute

　　Main Accomplishers: Sun Yushan, Zhu Qingsong, Jiang Xiaolin, Luo Qiang and Lu Yilun.

　　68. Trimethylolpropane Triacrylate (TMPTA)

　　Completed by: Jiangsu Litian Technology Co., Ltd.

　　Mainly completed by: Zhang Honda, Shi Wenfang, Zhao Chuanjiang, Liu Jianhua and Wang Zhengmei.

　　69. Development of new technology of polyester chip for membrane.

　　Completed by: China Petrochemical Yizheng Chemical Fiber Co., Ltd.

　　Mainly completed by: Dai Junming, Yang Kaiquan, Zhang Zhongan, Wang Jiurong and Li Jinping.

　　70. Development and industrialization of corona-resistant polyimide film

　　Completed by: Jiangsu Bingcheng Electric Materials Co., Ltd.

　　Mainly completed by: Zhu Aicheng, Xu Huilin, Guo Zhenbao, Nie Weimin and Zhu Hao.

　　71. Development and industrialization of high-grade coated paper for commercial rotary printing.

　　Completed by: Jindong Paper (Jiangsu) Co., Ltd.

　　Main Accomplisher: Wang Renrong Wu Guoquan Zhang Ming Gao Xiaofei Sun Changfang

　　72. Study on Photoconversion Membrane Technology of Novel Polymer Sm(III) Complexes

　　Completed by: Suzhou University

　　Mainly completed by: Lu Jianmei, Ji Shunjun, wang lihua, Qing-Feng Xu, Xue Yingwen.

　　73. Construction of sharing service platform for large-scale scientific instruments and equipment in Jiangsu Province

　　Completed by: Jiangsu Productivity Promotion Center

　　 Nanjing University

　　Mainly completed by: Hu Yidong, Xia Chunyang, Yuan Yubin, Li Bin and Lu Jianling.

　　74. Development and application of high strength low carbon bainite multiphase (fine grained ferrite) hot rolled sheet

　　Completed by: Shanghai Meishan Iron and Steel Co., Ltd.

　　 Northeastern University

　　Mainly completed by: Hu Hengfa, Pei Xinhua, Liu Xianghua, Du Linxiu and Wu Haofang.

　　75. Rare earth treatment of red copper directly produces high-performance copper alloy pipes.

　　Completed by: Gaoxin Zhangtong Co., Ltd.

　　 Central South University

　　 Dalian University of Technology

　　Main Accomplishers: Wei Biwen followed by Yang Hua, Di Mingyong and Wang Geng.

　　76. High-strength heat-resistant conductive titanium bronze alloy material

　　Completed by Taixing Shengda Copper Co., Ltd.

　　 Jiangsu university of science and technology

　　Mainly completed by: Xu Yusong, Yang Jilin, Zhang Yuanjian, Wang Jiayou and Li Min.

　　77. RoHS cadmium-free rare earth silver solder

　　Completed by: Nanjing University of Aeronautics and Astronautics

　　 Changshu Huayin solder co., ltd

　　Mainly completed by Xue Songbai, Gu Wenhua, Zhang Liang, Gu Liyong and Wang Hui.

　　78. Multi-frequency plasma and ion beam deposition of various micro-nano electronic thin film materials.

　　Completed by: Suzhou University

　　Main Accomplisher: Ning Zhaoyuan, Wu Xuemei, Ye Chao, Xin Yu and Zhuge Lanjian.

　　79. A series of studies on the treatment of intractable diseases in internal medicine from "blood stasis and heat"

　　Completed by: Nanjing University of Chinese Medicine

　　Mainly completed by: Zhou Xueping, Zhou Zhongying, Guo Lizhong, Jin Miaowen and Fang Taihui.

　　80. Experimental and clinical study of colloidal 32P- chromium phosphate in the treatment of solid tumors.

　　Completed by: Southeast University

　　 Beijing shijitan hospital

　　Main Accomplisher: Liu Zhiyong Feng Guosheng Teng Gaojun Gao Hong Tong Guansheng.

　　81. Study on Mycoplasma genitalium in nongonococcal urethritis

　　Setting: Institute of Dermatology, China Academy of Medical Sciences.

　　Mainly completed by: Wang Heying, Ye Shunzhang, Shi Meiqin, Lai Weihong and Jiang Wenhua.

　　82. 201Tl and 99mTc-HL91 binuclear SPECT anoxic imaging for evaluating ischemic viable myocardium in patients with coronary heart disease.

　　Completed by: First Affiliated Hospital of Suzhou University.

　　Mainly completed by: Yang Xiangjun, He Yongming, Wu Yiwei, Zhang Bin and Xu Haifeng.

　　83. Experimental study on pathogenesis and treatment of erectile dysfunction

　　Completed by: Gulou Hospital affiliated to Nanjing University School of Medicine

　　Main Accomplishers: Dai Yutian, Sun Zeyu, Chen Yun, Yao Leshen and Sun Lei.

　　84. Clinical basic research on thermochemotherapy and thermotargeted therapy for malignant tumor.

　　Completed by: Gulou Hospital affiliated to Nanjing University School of Medicine

　　Mainly completed by: Liu Baorui Qian Xiaoping Yang Mi Yang Yang Ding Yitao.

　　85. Clinical and basic research on non-immune nephropathy

　　Completed by: Children’s Hospital Affiliated to Suzhou University.

　　 Suzhou University

　　Main Accomplisher: Li Xiaozhong, Zhang Xueguang, Zhou Yun, Qiu Yuhua and Feng Qihua.

　　86. A series of studies on early intervention of high-risk neonatal brain injury with integrated traditional Chinese and western medicine.

　　Completed by: Nanjing Children’s Hospital affiliated to Nanjing Medical University.

　　Mainly completed by Zhou Xiaoyu, Fang Ning, Li Yong, Tang Chaomei and Qin Qin.

　　87. Molecular mechanism of semen liquefaction and clinical application of male infertility and birth control.

　　Completed by: Nanjing Medical University

　　Mainly completed by: Wang Zengjun Feng Ninghan Zhang Wei Liu Jiayin Wang Wei.

　　88. The application of flow cytometry in the study of thrombosis and bleeding.

　　Completed by: First Affiliated Hospital of Suzhou University.

　　Main Accomplisher: Han Yue Bai Xia Wang Zhaoyue Dai Lan Shen Wenhong

　　89. Experimental and clinical research on molecular targeted diagnosis and treatment mediated by somatostatin receptor.

　　Completed by: Nanjing First Hospital affiliated to Nanjing Medical University.

　　Mainly completed by: Wang Zizheng, Wang Feng, Qu Wei, Du Tongxin and Xu Jie.

　　90. Optimization of adeno-associated virus vector and its application in gene therapy of lung cancer

　　Setting: First Affiliated Hospital of Nanjing Medical University.

　　Mainly completed by: Wu Jianqing, Zhao Weihong, Yin Kaisheng, Cheng Yunlin and Li Yan.

　　91. Clinical study on surgical treatment of thoracic aortic dissection aneurysm

　　Completed by: Nanjing General Hospital of Nanjing Military Region

　　Main Accomplishers: Jing Hua Li Demin Dong Guohua Li Zhongdong Hu Xiaonan

　　92. Biomechanical study on extensive tooth defect and restoration.

　　Setting: Stomatological Hospital Affiliated to Nanjing Medical University.

　　Mainly completed by: Chen Yaming, Sun Yazhou, Wu Xinmeilei and Wang Jingjing.

　　93. Basic and clinical research on lumbar spondylolisthesis.

　　Completed by: First Affiliated Hospital of Suzhou University.

　　Mainly completed by: Chen Liang, Yang Huilin, Tang Tianqi, Qian Zhonglai and Hong Tianlu.

　　94. Study on molecular variation characteristics and diagnostic process of hereditary nonpolyposis colorectal cancer in China.

　　Completed by: Nanjing Traditional Chinese Medicine Hospital

　　 Shanghai Second Military Medical University

　　 Nanjing General Hospital of Nanjing Military Region

　　 Xinhua Hospital Affiliated to Shanghai Second Medical University

　　 Jiangsu Provincial Hospital of Traditional Chinese Medicine

　　Main Accomplishers: Jin Heiying Sun Shuhan Yan Hongli Ding Yijiang Zhang Gui

　　95. Study on virus transmission in the application of porcine liver cell bioartificial liver.

　　Completed by: Affiliated Hospital of Nantong University.

　　Mainly completed by: Chen Zhong, Ding Yitao, Chen Ruixin, Xu Xinhua, Su Mei.

　　96. Experimental and clinical study of CD40 system expression in unstable coronary plaque and restenosis.

　　Completed by: Affiliated Hospital of Jiangsu University.

　　 Zhongda Hospital Affiliated to Southeast University

　　Main Accomplishers: Yan Jinchuan, Liu Naifeng, Ma Genshan, Ding Shu and Dai Qiaowu.

　　97. Study on genetic polymorphism and methylation of genes related to non-small cell lung cancer and its clinical significance.

　　Completed by: Suzhou University

　　Mainly completed by: Zhang Hongtao Zhao Jun, Qi Zhenyu, Feng Yue and Liu Xia.

　　98. Study on Differentiation and Safety of Mesenchymal Stem Cells

　　Completed by: Jiangsu University

　　 Nanjing Normal University (NNU)

　　 affiliated hospital of jiangsu university

　　Mainly completed by: Xu Wenrong, Qian Hui, Zhu Wei, Zhang Xiran and Sun Xiaochun.

　　99. Experimental study on the correlation between fat band structure along meridians and meridians.

　　Completed by: Nantong University

　　 Nantong university affiliated tumor hospital

　　 China People’s Liberation Army Second Military Medical University

　　Mainly completed by: Meng Fanxun, Qiang Fulin, Zhang Lanfeng, Cai Jing and Wang Jing.

　　100. Study on dialogue between NMDA receptor and L- type calcium channel and signal transduction after receptor in cerebral ischemia.

　　Completed by: Xuzhou Medical College

　　Mainly completed by: Zhang Guangyi, Hou Xiaoyu, Liu Yong, Zong Yanyan and Li Hongchun.

　　101. The mechanism of paraventricular nucleus regulating cardiac sympathetic afferent reflex and sympathetic nerve activity and its relationship with chronic heart failure

　　Completed by: Nanjing Medical University

　　Main Accomplisher: Zhu Guoqing Happy Ya Hanying Zhang Feng Wang Hanjun

　　102. Development of a research platform for fetal dynamics in vivo and research on the influence of cholinergic factors on development.

　　Completed by: Suzhou University

　　Mainly completed by: Xu Zhice, Mao Caiping, Zhu Yanyan, Zhang Yuying and Wang Aiqing.

　　103. Molecular regulation mechanism of circadian clock.

　　Completed by: Suzhou University

　　Mainly completed by: Tong Jian, Wang Guoqing, Du Yuzhen, Qin Liqiang and Jiang Xinghong.

　　104. Research and application of low-cost gene polymorphism detection platform.

　　Setting: Institute of Military Medicine of Nanjing Military Region.

　　 Suzhou University

　　 China Pharmaceutical University

　　 Southeast China University

　　 nanjing sunshine biotechnology co., ltd

　　Main Accomplisher: Zhou Guohua Bu Ying Wang Weipeng Song Qinxin Huang Huan

　　105. Molecular cell biological markers and their application in tumor prevention and treatment.

　　Completed by: Jiangsu Cancer Hospital

　　Mainly completed by: Xue Kaixian, Zhao Jianhua, Chen Senqing, Ma Guojian and He Xiaosong.

　　106. ZJL 1-500 mine flameproof and intrinsically safe frequency conversion refrigeration device.

　　Completed by: Xuzhou Mining Group Co., Ltd.

　　 Tangshan kaicheng electrics co., ltd

　　Mainly completed by: Wang Chenggong, Liu Guangzhou, Pei Lirui, Sang Chengxi and Zhang Shusheng

　　107. Research on the prevention and control technology of major gas accidents in Xuzhou mining area

　　Completed by: Xuzhou Mining Group Co., Ltd.

　　Mainly completed by: Yao Dexiang, Ge Yiqun, Fan Yinhui, Chen Shengli, Jiahua Yang.

　　108. Evaluation of exploration targets for subtle oil and gas reservoirs in Jiangsu Oilfield

　　Completed by: Jiangsu Oilfield Company of China Petrochemical Company Limited.

　　Mainly completed by: Zhu Ping, Mao Fengming, Liang Bing, Zhong Siying and Liu Qidong.

　　109. Study on Basic Geology and Exploration Direction of Subei-South Yellow Sea Basin

　　Completed by: Jiangsu Oilfield Company of China Petrochemical Company Limited.

　　Mainly completed by: Liu Yurui, Liu Xiaojun, Zhang Yajun, Lou Guoquan and Zeng Ping.

　　110. Alkaline slag and waste concrete modified muddy soil are used for subgrade filling technology and demonstration.

　　Completed by: Changzhou Waterway Management Office

　　 Nanjing University of Aeronautics and Astronautics (NUAA)

　　Main Accomplisher: Liu Wenrong Xie Jianguang Yu Guojun Ma Heng Huang Yongming

　　111. Research on Measurement and Control Technology of Tower Beam Structure of Sutong Bridge

　　Completed by: Jiangsu Sutong Bridge Construction Headquarters

　　 Hohai University

　　 the second harbor engineering company

　　Mainly completed by: Yue Dongjie, Zhou Jianlin, Zhang Hong, Dehua Zheng, Ni Jianfeng.

　　112. Construction method of equal-thickness digging and mixing cement-soil cutoff wall

　　Completed by: Jiangsu Hongsheng Construction Engineering Group Co., Ltd.

　　 Gaoyou water conservancy technology popularizing service center

　　Mainly completed by: Chen Fukun, Zhai Haohui, Wang Qingsong, Wu Ping and Sun Gang.

　　113. Vehicle-pavement system dynamics theory and method

　　Completed by: Southeast University

　　Mainly completed by: Huang Xiaoming, Sun Lu, Deng Xuejun, Zhao Yongli and Gao Ying.

　　114. Nanjing urban geographical changes and modern landscape research.

　　Completed by: Nanjing University

　　Mainly completed by: Yao Yifeng, Zhang Qicheng, Yan Weijie.

　　115. Research on fatigue damage analysis theory and evaluation method of bridge structure.

　　Completed by: Southeast University

　　 The Hong Kong Polytechnic University

　　Mainly completed by: Z. X. Li Chen Hongtian, Gao Zanming, Guo Li and Jin Hui.

　　Study on bearing capacity of super-large bored pile group foundation of Sutong Bridge

　　Completed by: Jiangsu Sutong Bridge Construction Headquarters

　　 Southeast China University

　　 Hohai University

　　 Ministry of Water Resources, Ministry of Communications, Ministry of Electric Power Industry, nanjing hydraulic research institute

　　 Zhongjiao highway planning and design institute co., ltd

　　Main Accomplisher: You Qingzhong Gong Weiming Yuan Hong Wu Shouchang Chen Zhijian

　　117. Research on the Construction of Basic Database of Land and Resources

　　Completed by: Jiangsu Land and Resources Information Center

　　Mainly completed by: Song Xiaoqun, Zhou Weijuan, Wu Xiangyi, Wang Bin and Cao Wei.

　　118 large, complex, special shape steel structure manufacturing new technology, new technology research and application.

　　Completed by: Jiangsu Huning Steel Machinery Co., Ltd.

　　Mainly completed by: Wang Yinda, Wang Xiaobo, Shi Rongjin, Gu Xiaofu and Li Cuiguang.　

　　

　　Chinese special police anti-terrorism combat drill

　　"The period from now until the opening of the Beijing Olympic Games is a very’ fragile’ period. If there is a terrorist attack at this time, it will affect the decision of tourists from all over the world-whether to come to Beijing to watch the game in the end. " On the morning of March 17, at the press conference held by the Israeli Embassy in China, Israeli anti-terrorism expert Boaz? Dr. Gaynor told the reporter of the News of the World.

　　Threatening Beijing citizens on the eve of the Olympic Games should always be vigilant.

　　Dr. Gaynor said that the purpose of his current visit to China is to "introduce the nature of terrorist attacks and the extent they have reached to people who are engaged in the same work as me here, and contribute everything I know to their work".

　　For the world-famous Beijing Olympic Games, Gagno also put forward his own suggestions on its security and anti-terrorism work. He stressed that we can’t wait to be attacked, and we must take positive actions to defeat the terrorist attack plot. "In China, there are many potential targets that may be attacked, so it is important to get information as soon as possible in security work."

　　He immediately introduced his own experience without reservation: in the weeks before the Olympic Games, terrorists usually rent houses and plan attacks in the houses, so homeowners and restaurants should be vigilant at this time.

　　Gaynor stressed to the News of the World that the government needs the cooperation of the people in the fight against terrorism. For example, in 1995, the Tokyo subway in Japan was attacked by sarin gas. Many people were injured not because of sarin gas, but because of panic. Therefore, "it is very important to let people know what to do in the event of a terrorist attack."

　　"From the appearance, there is nothing special about terrorists. They may have blue eyes and black hair. They may come from Africa or the Middle East." What people need to learn is how to recognize them from their behavior, said Gagno. For example, in the hot summer, if you find a person wearing heavy clothes walking in the crowd; In parks or streets, there are lonely and neglected items, and ordinary people should get in touch with the police quickly.

　　Emphasizing that the Olympics is a high-risk target, terrorists may be more cunning.

　　Dr. Gaynor’s experience is not something you can easily get. In fact, not only in Israel, but also in the whole international counter-terrorism field, Boaz? Dr. Gaynor’s titles can be listed in a long list: deputy dean of the Lauder School of Government in Israel, member of the National Committee for Homeland Security Technology in Israel, founder and director of the International Institute for Counter-Terrorism Policy (ICT), founder and president of the International Institute for Counter-Terrorism (ICTAC) … In addition, he has served as an anti-terrorism adviser to Israel’s Ministry of Defense, an adviser to Israel’s National Security Council, and even former Israeli Prime Minister Benjamin? Netanyahu published the book "Anti-terrorism" and asked him to be a consultant.

　　Gaynor began his research on terrorism 25 years ago. When he was young, he worked as a pilot in the Israel Defense Forces. Later, he found that he was not suitable for this role, so he transferred to the Israeli intelligence service to engage in anti-terrorism work. Since then, fascinated by counter-terrorism, he has never left this field. In fact, anti-terrorism is not as simple as people think, but involves many disciplines, including psychology, sociology, high technology, medicine, law and so on.

　　"We are now in a transitional stage, that is, from modern terrorism to post-modern terrorism." Gaynor told the News of the World that no one in the world is absolutely safe from the threat of terrorism. The Olympic Games have provided many "opportunities" for terrorists, not just stadiums and other facilities. "Of course, I can’t assert that the Beijing Olympic Games will not be attacked by terrorists, but it is a fact that terrorists really want to attack."

　　Gagno believes that the terrorist threats faced by the Beijing Olympic Games and the last Athens Olympic Games are very similar, and they are all terrorist groups or organizations that are "interested" in the Olympic Games. However, there are also differences between them. Moreover, terrorists have learned from previous failed actions and may be more cunning and fierce when they strike again.

　　China police sent personnel to study counter-terrorism

　　Gaeno emphasized the importance of close international cooperation in anti-terrorism activities. He said that in previous Olympic Games, Israel’s intelligence agencies were invited by the host country to help the country fight terrorism together. I believe that intelligence personnel will also provide help in this Beijing Olympic Games.

　　In fact, as early as November 2007, the Israeli police spokesman Rosenfeld revealed that the China police delegation would arrive in Israel in March 2008. In about a month’s time, Chinese personnel will learn the skills of dealing with suicide attacks and riots at a border police base in Israel, as well as the theoretical and practical experience of how to intercept information from terrorist organizations.

　　In June 2007, the police chief of Tel Aviv, Israel, David? Sur also visited the China Institute of Contemporary International Relations to discuss the Olympic security work with scholars from the Anti-Terrorism Research Center of the Institute. During his visit to China, Gagno also communicated with major scientific research institutions in Shanghai and Beijing respectively.

　　On the afternoon of March 17th, Gagno had an exchange with Li Wei, an anti-terrorism expert of China Institute of Contemporary International Relations. Li Wei told reporters that Gagno has many original opinions on the study of terrorism, and also has many in-depth studies on the laws, ways and means of terrorism. In the process of communication, the two sides have a common understanding of the increasingly rampant international terrorist threat. Of course, different countries still face different threats.

Editor: Wang Yuxi